Got a Logitech squeezebox receiver the other day and after plugging it in to my switch, I assumed it would just acquire an IP (using DHCP) and just start working.
After 2 hours of changing network cables, restarting various network devices and a little bit of cursing I retreated to Google for some help.
Turns out that the Squeezebox receiver is not to be used on its own. It is to be used together with a controller and the controller is required for initial configuration.
The only reason Squeezebox receivers are sold on their own is for people that want additional receivers for their rooms.
In my case I knew there are mobile applications that can control the music playing or that one can even connect to the web interface of the Squeezebox Server.
The controller is twice the price of a receiver and being the cheapskate I am I didn't want to fork out extra money just to configure my receiver.
1) Borrow a controller from a friend
2) Use Net::UDAP to find your SqueezeBox receiver on the network and to configure it
Net::UDAP is a Perl module so if you are not familiar with Perl programming just download the following executable:
For a wired configuration (not WiFi), you can use the below command sequence:
set squeezecenter_address=[ip address of your computer running squeeze server]
For a wireless configuration use instead:
set interface=0 lan_ip_mode=0 lan_gateway=192.168.3.1 lan_network_address=192.168.3.10 lan_subnet_mask=255.255.255.0 primary_dns=192.168.3.1 wireless_SSID=3Com wireless_wep_on=1 wireless_keylen=1 wireless_mode=0 wireless_region_id=14 wireless_wep_key_0=[WEP key] wireless_channel=11 squeezecenter_address=[ip address of your computer running squeeze server]
You will obviously have to be connected to the receiver via a network cable to be able to configure it.
Type help or fields to list all device fields along with some documentation of the values they can take.